iFJF R12H (R12T Upgrade) Fuel Water Separator Marine Complete Combo - Replaces S3240 120AT NPT ZG1/4-19 Automotive Replacement Spin-on Filter Includes 2 Fittings 2 Plugs

• New upgrade: This product is an upgraded version of R12T. The R12T filter element is not removable, and the housing needs to be replaced at the same time as the replacement. The R12H filter element is detachable, and you only need to replace the internal filter element each time, which greatly saves your cost. Please note: The internal filter element requires a certain amount of effort to be pushed out.
• Buyer Benefits: Two filter elements and two O-rings are given for free, so there are three filter elements and four O-rings in total. Package includes: 1 x R12H Fuel Water Separator complete combo, 2 x connection fittings, 2 x plugs, 2 x additional filter elements, 2 x additional O-rings.
• Material Upgrade: For ships going to sea, iron products are very easy to be damaged due to the influence of seawater and sea breeze. The upgraded R12H adopts aluminum alloy material and plastic-sprayed processing technology as a whole, which effectively avoids the above-mentioned problems.
• Replace Part Number: S3240 R12T 120AT, 18-7987, RK10222.
• Features: This spin-on filter design is easy to replace, and other parts except the filter element can be reused. The black valve under the transparent nylon collection bowl can control the discharge of water. The R12H filter is designed for high-performance applications, and with a flow rate of 15 GPH. Through the advanced large-capacity filter media, water and particles as small as 10 microns are removed to ensure that the incoming fuel is free of water and other particles.
• It is recommended to check and replace the oil cup and filter element regularly.

Cost saving

This product is an upgraded version of R12T.

The replacement of the R12H filter only needs to replace the filter element, which greatly saves your cost

Please note: It takes a certain amount of effort to push out the old filter element.

Material upgrade

Anti-corrosion: For ships going to the sea, iron products are easily damaged by the influence of sea water and sea wind. The upgraded R12H adopts aluminum alloy material and plastic spraying process as a whole, and the shell is anti-corrosion and durable.

No leakage: Due to the new design, the R12H casing is very firm and compact, which makes the R12H avoid the problem of oil leakage from the general filter.

We have heard your voice

We have now processed the inside of the tank into a mirror surface, so the coating will not fall off.

The upper and lower end covers of the filter element have now been changed to plastic, so corrosion will not occur.

We have always been committed to listening to the voice of users and meeting their needs.

We also hope that every user can provide us with helpful suggestions, and we will make timely improvements and continuously optimize our products.

Installation instruction

1. Before installation, please remove the nylon collecting bowl and filter base to lubricate the O-ring of the filter.

2. There are two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.

3. Before installing the filter, you must remove those plugs, stick them with Teflon tape, and then reinstall.

4. All of the above steps are very easy to operate, you'd better use the tool to install tighten.